Inspector Tech - MFCD Irvine, CA

With minimum guidance in a team environment, using independent judgement to determine quality and usability, responsible for a wide variety of complex inspection requirements.

Responsibilities may include some or all of the following:

• Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications.
• Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film.
• Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history.

INSPECTION

• Perform inspection on complex parts using a wide variety of measuring and test equipment.
• Adapt and develop complex inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts.
• Perform first article and envelope inspections, source inspections, and/or complex surface plate set-ups.
• Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards.
• Layout all component part characteristics onto rough or semi-machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing.
• Make own gaging set-ups on surface plate using block, parallels, clamps, sine plates and V-blocks to take readings with precision measuring instruments.
• Adapt inspection equipment to check standard, non-standard and special products.
• Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary.

CALIBRATION

• Perform calibration on complex multi-function electronic measuring and test equipment.
• Set-up calibration test conditions having various circuit requirements interpreting calibration procedures, specifications, manufacturer's instructions, or related documents.
• Ability to interpret drawings and electronic schematics.
• Document and evaluate historical data to determine calibration intervals.
• Diagnose and calibrate newly acquired complex electronic equipment.

NONDESTRUCTIVE TEST

• Perform daily, weekly and monthly equipment and material checks.
• Perform pre-inspection and post-inspection cleaning.
• Set-up equipment and conduct tests.
• Interpret, evaluate and document inspection results in accordance with approved procedures.
• Perform complete inspections in accordance with applicable specifications, standards and other contractual documents.
• Operate X-ray equipment and film processor.
• Select the method and technique to be used for a specific inspection.
• Prepare and verify the adequacy of inspection procedures.
• Approve procedures, specifications, standards and other written documents that control the inspection.
• Conduct or direct the training and examination of Level I, II and III personnel.
• Observe all prescribed safety rules and regulations and maintain a FOD free work area.
• Perform other related responsibilities.

• Five years related inspection experience or demonstrated ability to perform described responsibilities.
• Knowledge of applicable military standards or specifications.
• May be required to be certified as a Level II Nondestructive Test Inspector in at least three disciplines or as a Level III Examiner in at least one discipline. Certification must be in accordance with MIL-STD-410 and PES1-29.
• Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
• Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures.
• Thorough knowledge of machine shop mathematics including trigonometry.
• Knowledge of electro-hydraulic servo systems and the computer IEEE systems.
• Personal hand tools may be required.
• May be required to lift up to 50 lbs.
• Must demonstrate effective verbal, written and communication skills.
• Ability to work effectively with others and be a participative team player.

Please note that the salary range information is only applicable for California. Compensation is based on a variety of factors, candidate experience, qualifications, location as well as market and business considerations. Pay Range: $30.47/hour - $45.81/hour.

This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders], or have refugee or asylee status).

Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. This position is subject to meeting export compliance eligibility requirements.

("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor")

If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to http://www.eeoc.gov/employers/upload/eeoc_self_print_poster.pdf
and
http://www1.eeoc.gov/employers/upload/eeoc_gina_supplement.pdf

Drug-Free Workplace
In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.